[cisco-voip] POE vs local power cube

[Nate VanMaren]

Yeah I know about show power inline. I am trying no not have to shell in to a couple hundred switches to get status on thousands of phones.

Thanks
-Nate
-----Original Message-----
From: MManly at TEP.com [mailto:MManly at TEP.com] 
Sent: Wednesday, February 27, 2013 2:10 PM
To: Nate VanMaren; cisco-voip at puck.nether.net
Subject: RE: POE vs local power cube

If Web access is enabled on the phone, you can click on the IP address of the phone, then Network, scroll down to locate the IP Address of the CDP neighbor and switchport, then log into the switch and issue "sho power inline <switchport/#>

#sho pow inline g1/0/24
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)                            
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/24  auto   on         12.0    IP Phone 7965       3     30.0 

Interface  AdminPowerMax   AdminConsumption    
             (Watts)           (Watts)           
---------- --------------- --------------------  

Gi1/0/24              30.0                 30.0

Or, show power inline and you will see something like this:

#sho pow in

Module   Available     Used     Remaining
          (Watts)     (Watts)    (Watts) 
------   ---------   --------   ---------
1          1440.0      217.3      1222.7
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)                            
--------- ------ ---------- ------- ------------------- ----- ----
Gi1/0/1   auto   on         12.0    IP Phone 7965       3     30.0 
Gi1/0/2   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/3   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/4   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/5   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/6   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/7   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/8   auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/9   auto   on         12.0    IP Phone 7965       3     30.0 
Gi1/0/10  auto   off        0.0     n/a                 n/a   30.0 
Gi1/0/11  auto   on         12.0    IP Phone 7965       3     30.0 
Gi1/0/12  auto   off        0.0     n/a                 n/a   30.0

FLG-ADM-3750-A1#
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate VanMaren
Sent: Wednesday, February 27, 2013 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] POE vs local power cube

Is there any way to query from the phone if it's using POE or a power cube?

Thanks
-Nate


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.