[cisco-voip] upgrade during install from 9.0 to 9.1

[Tim Frazee]

I could see that.

But tell that to my 8.5 upgrade from an 8.0 boot disk I was able to do back
in the day......

In short, you say that the only way currently to get to 9.1 is upgrade from
an already installed support version, not during the install process.



for the record and I know its not supported, I did try the hack of grabbing
the boot info file from 9.0 and pushing it into the 9.1 iso. The install
process failed post installing everything.

Thanks for digging Ryan.



On Wed, Jan 2, 2013 at 12:21 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> Confirmed I see it here in the lab and it looks to be intentional, though
> I'm still digging.
> Initial word is for a while now upgrade-during-install is only supported
> to the same major/minor version.
>
> Anything beyond that requires a separate upgrade after install.
>
> -Ryan
>
> On Jan 2, 2013, at 11:18 AM, Tim Frazee <tfrazee at gmail.com> wrote:
>
> I did just that. after I tried with the pre-release, I used my NFR iso.
> Same result.
>
> I only used the pre-release because it was already on my datastore and i
> was feeling a bit lazy over vacation. After I attempted the same procedure
> with 9.0(1) -37 iso, I received the exact same error.
>
> Ryan, should I be able to boot off of 9.0 and upgrade-during-install with
> 9.1?
>
> On Wed, Jan 2, 2013 at 9:47 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
>
>> 9.0.0.99101-22 is not a 9.0 ES, it's a pre-release build of 9.1.  Throw
>> it in the trash and try with a real 9.0 build (I'm going to start this
>> now).
>>
>> -Ryan
>>
>> On Jan 2, 2013, at 9:50 AM, Tim Frazee <tfrazee at gmail.com> wrote:
>>
>> I didnt test to see if the 9.1 from CCO is bootable. In the past they
>> havent been.
>>
>> attached is a screenshoot of the error I received when I tried to feed
>> the 9.1 via CCO during a booted-from-nfr9.0 media
>>
>> On Mon, Dec 31, 2012 at 5:02 PM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:
>>
>>>  I had lots of problems doing upgrade during installs with 9.0 ESs.
>>> The ESs are usually bootable so I just gave up and installed fresh.  Is the
>>> 9.1 download bootable?****
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Tim Frazee
>>> *Sent:* Monday, December 31, 2012 3:50 PM
>>> *To:* cisco-voip at puck.nether.net
>>> *Subject:* Re: [cisco-voip] upgrade during install from 9.0 to 9.1****
>>>
>>> ** **
>>>
>>> This was for UCM and Unity Connection. didnt try anything else.
>>>
>>>
>>> ****
>>>
>>> On Mon, Dec 31, 2012 at 1:04 PM, Tim Frazee <tfrazee at gmail.com> wrote:**
>>> **
>>>
>>> I have the 9.0 NFR and the 9.1 upgrade iso pulled from CCO.
>>>
>>> I'm getting an error if I feed the 9.1 iso to the 9.0 install process
>>> that i want to upgrade during the install process. I've been able to do
>>> this many times in the past with never a problem like this.
>>>
>>> Anyone have any ideas?****
>>>
>>> ** **
>>>
>>>
>>>
>>> NOTICE: This email message is for the sole use of the intended
>>> recipient(s) and may contain confidential and privileged information. Any
>>> unauthorized review, use, disclosure or distribution is prohibited. If you
>>> are not the intended recipient, please contact the sender by reply email
>>> and destroy all copies of the original message.****
>>>
>>>
>> <temp.png>_______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130102/6173e995/attachment.html>