[cisco-voip] Simulate SIP error code 408 and 603 from CUBE

[Mark Holloway]

You need a SIP device to originate the call to CUBE and something on the "other side" of CUBE to generate the 603 message. For SIP 408, this usually occurs when a SIP INVITE Timeout occurs. You could configure CUBE to forward to some null device to the INVITE will timeout and CUBE will send 408 back to the originating party.

SIPp and X-Lite work well for this sort of thing. 


On Jan 10, 2013, at 9:08 PM, Me <mizzou0 at yahoo.com> wrote:

> Is there a way to simulate SIP error code 408 (Not Available) and 603 (Reject) from a Cisco CUBE?    Such as making a call to a number router returns the SIP errors.
> 
> Regards,
> Dave
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130110/5de09708/attachment.html>