[cisco-voip] CUCM MTP and g729

[Justin Steinberg]

interesting.    I always wondered why the software MTP couldn't terminate
G729 for things like DTMF mismatch.  It isn't like it is transcoding audio,
it is simply handling different DTMF protocols.

is it possible Wireshark is just identifying it incorrectly?  could you try
to convert it to audio and see if you hear it.

On Fri, Jan 11, 2013 at 3:11 PM, Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> Hi All,
>
> I have a wireshark capture off of my CUCM 8.6(2) which shows that it is
> receiving a g729 audio stream from my VG224.
>
> Long story short, according to the CUCM SRND, the CUCM MTP can only
> terminate g711, and yet, attached is a screenshot of the wireshark capture
> which clearly shows it terminating g729.
>
> What piece of this puzzle am I missing?  Also, the CUCM traces read like
> the MTP is being invoked on that CUCM.  It's due to the lack of the fm
> package on my VG224 and a mismatch in DTMF to the PSTN (SIP).  I had a fun
> time resolving that, as you can probably imagine.
>
> Thanks and Happy Friday!
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130111/db790514/attachment.html>