[cisco-voip] Design question CTI or DN?

Nate VanMaren VanMarenNP at ldschurch.org
Mon Jan 14 22:35:17 EST 2013


Ah, my new best friend is import/export.

It's really just a CSV that does anything.

I haven't done it with DNs, but I just imported all of the permutations of phone button templates in a few seconds.

Export something, look at the CSV in the TAR, edit it to what you want, and load it back in.

Thanks,
-Nate

From: Mike [mailto:mikeeo at msn.com]
Sent: Monday, January 14, 2013 8:30 PM
To: Nate VanMaren; 'cisco voip'
Subject: RE: [cisco-voip] Design question CTI or DN?

True, but I never seen a way to BAT in DNs.

From: Nate VanMaren [mailto:VanMarenNP at ldschurch.org]
Sent: Monday, January 14, 2013 10:27 PM
To: Mike ; 'cisco voip'
Subject: RE: [cisco-voip] Design question CTI or DN?

You don't need DNs on a device anymore for them to be active.  They just need to be marked as "active"


From: Mike [mailto:mikeeo at msn.com]
Sent: Monday, January 14, 2013 8:25 PM
To: Nate VanMaren; 'cisco voip'
Subject: RE: [cisco-voip] Design question CTI or DN?

I was thinking of doing a wildcard 1XXX, 2XXX, 3XXX etc , but that might get ugly. Its weird they don't want to use SNR they just want the call to go to voicemail. I don't think you can BAT in DNs only CTI ports right?

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate VanMaren
Sent: Monday, January 14, 2013 10:19 PM
To: Mike ; 'cisco voip'
Subject: Re: [cisco-voip] Design question CTI or DN?

What needs to happen to an assigned DIDs?  If it's ok for them to go to a call handler, then just have a wildcard for the whole block that sends anything un assigned to Unity, then it will match their mailbox if it can or they can go to a callhandler.

Or build DNs for each number, not a ton of fun but can be made easier with AXL or BAT, the real trouble is keeping them up to date.

-Nate

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike
Sent: Monday, January 14, 2013 7:01 PM
To: 'cisco voip'
Subject: [cisco-voip] Design question CTI or DN?

I have about 1500 voice mail only users that I have in Unity connections and I was wondering that the best way to get their DIDs into unity cx. I was thinking I can create CTI ports send them all to voicemail. The problem is the customer owns the whole block 0000-9999 and the DIDs are all over the place or I'd create a wild card hunt pilot.

Any ideas?

Thanks,
Mike


NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.



NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130115/8f6dbd09/attachment.html>


More information about the cisco-voip mailing list