[cisco-voip] 2960s-48fps-l flex stack

[Buchanan, James]

What is the IOS being run? Is it IP Base? I don’t think anything lower will run the stacking module.


James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com<http://www.presidio.com>
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>



[Be Secure In The Knowledge]<http://www.presidio.com>


Follow us:

[Follow Presidio on Twitter]<http://www.twitter.com/presidio>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alan Buxey
Sent: Tuesday, January 15, 2013 9:35 AM
To: svoll.voip at gmail.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2960s-48fps-l flex stack

I've seen this on ios 15 with flexstack modules. Have you tried removing the module and re-inserting, or a power cycle with the module installed?

alan

This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130115/43a2c3bc/attachment.html>