[cisco-voip] Call drops after taking off hold

[John Van Laecke]

Add bearer-cap speed to the voice port on the gateway




From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rynard Coetzee
Sent: Tuesday, 22 January 2013 2:56 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call drops after taking off hold

Hi
I have the following scenario at a client site ,call comes from PSTN via H323 GW ,I can answer the call and place the caller on hold ,when I try and resume the call ,the Telco drops the call with a " Bearer capability not implemented" error. Any ideas what the problem could be ?
Regards
Rynard

_____________________
This e-mail has been scanned for viruses by MessageLabs.

_____________________ 
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________ 
This e-mail has been scanned for viruses by MessageLabs.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130122/35b145a9/attachment.html>