[cisco-voip] Tandberg E95 SIP reg

[Florian Kroessbacher]

hy,

are the vc standard based sip devices likeu mentioned below. i think it has to be enhanced one to  do video

--
Florian Kroessbacher
gmail: florian.kroessbacher at gmail.com

Am 23.01.2013 um 14:21 schrieb abbas Wali <abbaseo at gmail.com>:

> I have used the below link to reg. my two VC units as SIP. but they can only make voice based calls and the video which is set to the default is not working.
> 
> any ideas!!
> 
> thanks all.
> 
> On 21 January 2013 19:37, Florian Kroessbacher <florian.kroessbacher at gmail.com> wrote:
>> Hy
>> 
>> Maybe this helps
>> https://supportforums.cisco.com/thread/2151443
>> 
>> cheers Floh
>> 
>> Florian Kroessbacher
>> 
>> gmail: florian.kroessbacher at gmail.com
>> 
>> 
>> On Mon, Jan 21, 2013 at 8:15 PM, abbas Wali <abbaseo at gmail.com> wrote:
>>> Guys,
>>> 
>>> having issues registering Tandberg Edge 95 to CUCM 8.5 via SIP as per attachements.
>>> .75 is one of our Subs. 
>>> I have added it on the CM side as a basic 3rd Party SIP device with no authentication. 
>>> not sure about the Display name and the SIP address in the photo 1.
>>> 
>>> Any Help.
>>> 
>>> We have though configured it as a H323 client and that works fine. just to add it as SIP as well for more flex.
>>> 
>>> Thanks 
>>> 
>>> -- 
>>> @bbas.. 
>>> 
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 
> -- 
> @bbas.. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130123/2f478da3/attachment.html>