[cisco-voip] http download of firmware matrix

[Ryan Ratliff]

6901/11 is the same family as the other 69XX models but did not get HTTP download in 9.2(1) and I would not expect them to pick it up in the future.   I don't know the reason for them being left out but they don't seem to be getting many of the new features other 69XXs are over the last few releases.  

-Ryan

On Jan 29, 2013, at 11:00 AM, Nate VanMaren <VanMarenNP at ldschurch.org> wrote:

I have lots of phones at remote sites.  This has always been a challenge to get firmware pushed to them.  HTTP Download, peer firmware sharing, and Load Server have helped, but the 6900s don’t have peer firmware sharing or load server capability.
 
I got tired of trying to remember/look up what version added HTTP download so I made myself a little chart, I share it here because I am cool like that.
 
 
Model
Version HTTP downloaded enabled
Upgrade considerations
6901
???
need unsigned load to get to 9.x firmware
6911
???
need unsigned load to get to 9.x firmware
6921
9.2(1)
need unsigned load to get to 9.x firmware
6941
9.2(1)
need unsigned load to get to 9.x firmware
6945
9.2(1)
need unsigned load to get to 9.x firmware
6961
9.2(1)
need unsigned load to get to 9.x firmware
7905
Probably not going to be enabled
7906
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7911
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7912
Probably not going to be enabled
7931
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7937
Probably not going to be enabled
7940
Probably not going to be enabled
7941
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7942
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7945
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7960
Probably not going to be enabled
7961
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7962
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7965
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7970
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7971
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
7975
9.3(1)
need 8.3(3) to 8.5(2) to get to 8.5(3)+
8941
9.2(3)
need 9.3.1 to get to 9.3.2
8945
9.2(3)
need 9.3.1 to get to 9.3.2
8961
9.1(1)+Peer Firmware
9951
9.1(1)+Peer Firmware
9971
9.1(1)+Peer Firmware
 
Does anyone know if the 6901/6911s support http download and what version it was added?  I have looked through all of the release notes and did not see it highlighted.
 
Thanks
-Nate


NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130129/e12cf819/attachment.html>