[cisco-voip] AS5400 working as CUBE

[Maciej Bylica]

Hi Joel,

Thanks for prompt answer.
Have you tried to use transcoding in your case?

Thanks,
Maciej.


2013/7/30 Joel Perez <tman701 at gmail.com>

> Hi Mac,
>
> I haven't used an AS5400 for CUBE but I have used an AS5350. They are
> somewhat similar so i would venture to say that you could.
> In my case I used it for sip-sip connections only also, never had any E1's
> configured.
>
> Joel P
>
>
> On Tue, Jul 30, 2013 at 3:47 PM, Maciej Bylica <mbsip at gazeta.pl> wrote:
>
>> Hello,
>>
>> I want to know if i could use AS5400 for sip-to-sip connections only.
>> If possitive, could i just use incomig and outgoing voip dialpeers for
>> this purpose or i need to proceed with back-to-back E1 configuration?
>>
>> Of course i need to proxy RTP traffic as well.
>>
>> Thanks in advance for information.
>> Mac.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130730/6aa40198/attachment.html>