[cisco-voip] SNMP restore during migration

[Wes Sisk]

Looks like CER did not learn from CUCM:
CSCtd34573    CDPAGT component restored snmpd config leads to SysObjectID mismatch 

You will need to open a TAC case, provide remote access, and a remote support account. This should be investigated as a new or existing bug for CER.

Regards,
Wes

On Jun 19, 2013, at 1:42 PM, "Pawlowski, Adam" <ajp26 at buffalo.edu> wrote:

I've migrated a CER host from a fixed server to VMWare, version 9.0(2). I note, however, it appears to have "Restored" some sort of SNMP information, causing the virtual appliance to represent itself as the MCS that was replaced, and not the VMWare appliance. Is there some way to reset this data so the device is correctly managed and represented ? I can't seem to find a way to do it.

Thanks,

Adam P
SUNYAB

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip