[cisco-voip] Outgoing cLI

[Adewale2]

Hello ,
 Are they for TEHO between H.323 to CUCM or Gateway -2- Gateway?

 
Heaven is Real try your best to be there, and in all your getting get understanding
God's Own
Addy


________________________________
 From: Robert Kulagowski <rkulagow at gmail.com>
To: costas georgiou <ckos1976 at hotmail.com> 
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net> 
Sent: Thursday, June 20, 2013 3:19 PM
Subject: Re: [cisco-voip] Outgoing cLI
 

On Thu, Jun 20, 2013 at 7:29 AM, costas georgiou <ckos1976 at hotmail.com> wrote:
> Hi All,
>
> I have an MGCP and a H323 gateway and I am trying to send out the correct
> number.  When a call is made it sends out the main number i.e. receptions
> number rather than the users extension.  CLI is enabled by the provider.
> The outbound call Calling party presentation is set to default and so is the
> Route group. I have even amended that to Allow but still not sending the
> correct digits.

You said that you have both MGCP and H.323. Which gateway are your
outbound calls using?

Do a "debug isdn q931" and then a "term mon" and capture the output of
an outbound call.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130620/d7db896c/attachment.html>