[cisco-voip] Outgoing cLI

[Nicholas Samios]

Grab a Q931 debug from the gateway confirm what is being sent out the SETUP stack and work backwards from there.

If all your calls are being stamped with the trunk pilot it's probably the carrier either hasn't enabled CLI presentation or you're not sending the correct stack out.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adewale2
Sent: Friday, 21 June 2013 3:51 AM
To: Robert Kulagowski; costas georgiou
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Outgoing cLI

Hello,
Could you send their Dial-peer config or configuration.


Heaven is Real try your best to be there, and in all your getting get understanding
God's Own
Addy
________________________________
From: Adewale2 <adewale2 at yahoo.com<mailto:adewale2 at yahoo.com>>
To: Robert Kulagowski <rkulagow at gmail.com<mailto:rkulagow at gmail.com>>; costas georgiou <ckos1976 at hotmail.com<mailto:ckos1976 at hotmail.com>>
Cc: "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thursday, June 20, 2013 4:25 PM
Subject: Re: [cisco-voip] Outgoing cLI

Hello ,
 Are they for TEHO between H.323 to CUCM or Gateway -2- Gateway?


Heaven is Real try your best to be there, and in all your getting get understanding
God's Own
Addy
________________________________
From: Robert Kulagowski <rkulagow at gmail.com<mailto:rkulagow at gmail.com>>
To: costas georgiou <ckos1976 at hotmail.com<mailto:ckos1976 at hotmail.com>>
Cc: "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thursday, June 20, 2013 3:19 PM
Subject: Re: [cisco-voip] Outgoing cLI

On Thu, Jun 20, 2013 at 7:29 AM, costas georgiou <ckos1976 at hotmail.com<mailto:ckos1976 at hotmail.com>> wrote:
> Hi All,
>
> I have an MGCP and a H323 gateway and I am trying to send out the correct
> number.  When a call is made it sends out the main number i.e. receptions
> number rather than the users extension.  CLI is enabled by the provider.
> The outbound call Calling party presentation is set to default and so is the
> Route group. I have even amended that to Allow but still not sending the
> correct digits.

You said that you have both MGCP and H.323. Which gateway are your
outbound calls using?

Do a "debug isdn q931" and then a "term mon" and capture the output of
an outbound call.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130621/e02ae743/attachment.html>