[cisco-voip] translate called no

[Shaihan Jaffrey]

Any suggestions.
On 25 Jun 2013 17:28, "Shaihan Jaffrey" <schaehan at gmail.com> wrote:

> i have a scenario where incoming calls through PSTN need to be translated
> to a UK toll free number and going out thorough a SIP trunk provider.
>
> Please let me know if the below mentioned config on Voice GW is Ok for
> this purpose.
>
>
>
>
>
> voice call send-alert
>
>
>
> voice call carrier capacity active
>
>
>
> voice rtp send-recv
>
>
>
> !
>
>
>
> voice service voip
>
>
>
> allow-connections h323 to h323
>
>
>
> allow-connections h323 to sip
>
>
> allow-connections sip to sip
>
>
> allow-connections sip to h323
>
>
>
> !
>
>
>
> sip
>
>
> rel1xx disable
>
>
> min-se  360
>
>
> header-passing
>
>
> !
>
> !
>
>
>
> voice class codec 10
>
>
>
> codec preference 1 g711ulaw
>
>
>
> codec preference 2 g711alaw
>
>
>
> codec preference 3 g729r8
>
>
>
> !
>
>
>
> !
>
>
>
> voice translation-rule 3
>
>
>
> rule 1 /.*/ /12345/           ! ! !  12345 = UK number
>
>
>
> !
>
>
>
> !
>
>
>
> voice translation-profile ITSP_Outgoing
>
>
>
> translate called 1
>
>
>
> !
>
>
>
> !
>
>
>
> !
>
>
>
> voice-port 0/0/0
>
>
>
> !
>
>
>
> voice-port 0/0/1
>
>
>
> !
>
>
>
> voice-port 0/0/2
>
>
>
> !
>
>
>
> voice-port 0/0/3
>
>
>
> !
>
>
>
> !
>
>
>
> dial-peer voice 111 pots
>
>
> translation-profile incoming 1
>
>
>
> incoming called-number .T
>
>
>
> direct-inward-dial
>
>
>
> port 0/0/0
>
>
>
> !
>
>
>
> !
>
>
>
> dial-peer voice 1 voip
>
>
>
> destination-pattern .T
>
>
>
> voice-class codec 1
>
>
>
> session protocol sipv2
>
>
> session target ipv4:1.1.1.1    !!!!!!               ITSP IP
>
>
> dtmf-relay rtp-nte sip-notify h245-alphanumeric
>
>
> no vad
>
>
> !
>
>
>
> !
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130626/315d5700/attachment.html>