[cisco-voip] CUCM 9 incoming SIP trunk to queue: early media problem

[Cheng, Karen]

I thought you could tick the Disable Early Media on 180 under the SIP Profile attached to the SIP Trunk in CUCM.

Karen Cheng
Voice Engineer

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, 28 June 2013 8:47 PM
To: Carlos G Mendioroz
Cc: cisco-voip
Subject: Re: [cisco-voip] CUCM 9 incoming SIP trunk to queue: early media problem

Not for the early announcement feature for hunt pilots, no.

-Ryan

On Jun 27, 2013, at 6:31 PM, Carlos G Mendioroz <tron at huapi.ba.ar<mailto:tron at huapi.ba.ar>> wrote:

Hi,
I'm playing with using the "new" queue feature to do a simple welcome
message before attendant. Works a treat for inside calls, but CUCM is
doing early media (183 progress with SDP) for the message and my ITSP is
not cutting the audio through :(

I've found no way to tell CUCM to accept the call right away. Is there any ?

TIA,
--
Carlos G Mendioroz  <tron at huapi.ba.ar<mailto:tron at huapi.ba.ar>>  LW7 EQI  Argentina
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


________________________________

This communication has been sent on behalf of RACQ Insurance Limited [RACQI]. The information contained in this communication may be privileged and confidential. If you are not the intended recipient, any use, disclosure or copying of this communication is expressly prohibited.
If you have received this communication in error, please delete it immediately. RACQI and its associated entities do not warrant or represent that this communication [including any enclosed files] is free from electronic viruses, faults or defects.

ReMEMBER to save 15% when you pre-purchase your Ekka tickets through RACQ until 16 June 2013

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130701/820e116c/attachment.html>