[cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ?

[Lelio Fulgenzi]

We use the TAMB at a few places, but we bought them specifically to be used with FXS ports off our VG248s not FXO ports. I thought you could almost connect directly to the paging system with an FXO. 

Can you try using an FXS port to see if things improve?

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Mar 15, 2013, at 10:36 AM, "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> wrote:

>  
> Customer has a Bogen TAMB2 paging system integrated with CUCM 8.5.1.  The paging works, but not all the time, more like 50% of the time it will work and 50% of the time it will not.  It seems like the calls do not always disconnect from the paging system.  Does anyone have any experience with these systems having this problem?  
>  
> It is currently going out an FXO port on the voice gw (2951 with pvdm3-64)
>  
> =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.03.14 16:07:55 =~=~=~=~=~=~=~=~=~=~=~=
> term mon 
> culmvoipgw1#terr m len 0
> culmvoipgw1#
> 001038: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
> 001039: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
> 001040: Mar 14 22:08:10 MEZ: %FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally.htsp_setup_req
> 001041: Mar 14 22:08:10 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_HTSP_SETUP_REQ]fxols_onhook_setup
> 001042: Mar 14 22:08:10 MEZ: [0/2/0] set signal state = 0xC timestamp = 0
> 001043: Mar 14 22:08:10 MEZ: htsp_timer - 500 msec
> 001044: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_DSP_SIG_0110]fxols_disc_clear
> 001045: Mar 14 22:08:11 MEZ: htsp_timer_stop2 
> 001046: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER]fxols_wait_dial_timer  htsp_dial
> 001047: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]fxols_wait_dial_done htsp_alert
> 001048: Mar 14 22:08:11 MEZ: htsp_timer - 350 msec
> 001049: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_CUT_THRU, E_HTSP_EVENT_TIMER]fxols_handle_cut_thru
> 001050: Mar 14 22:08:11 MEZ: htsp_timer_stop 
> 001051: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
> 001052: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_OFFHOOK, E_HTSP_RELEASE_REQ]fxols_offhook_release
> 001053: Mar 14 22:08:15 MEZ: htsp_timer_stop 
> 001054: Mar 14 22:08:15 MEZ: htsp_timer_stop2 
> 001055: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
> 001056: Mar 14 22:08:15 MEZ: [0/2/0] set signal state = 0x4 timestamp = 0
> 001057: Mar 14 22:08:15 MEZ: htsp_timer - 2000 msec
> 001058: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_DSP_SIG_0110]
> 001059: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER]fxols_guard_out_timeout
> 001060: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_DSP_SIG_0100]u all
> All possible debugging has been turned off
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130315/c27611e5/attachment.html>