[cisco-voip] Room Recording using DMS

[Russell Chaseling]

Thanks Matthew.....definitely an option I will give them. 

Have also just remembered you can setup PLAR with IP Phones that might do the trick http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml for the 7937s.




-----Original Message-----
From: Matthew Ballard [mailto:mballard at otis.edu] 
Sent: 28 March 2013 21:50
To: Russell Chaseling; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Room Recording using DMS

You could use a device like:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2ptt/index.html
Or:
http://www.cyberdata.net/products/voip/digitalanalog/intercomindoorv3/index.html

Which both have push button options for making a call automatically to a number.

One way to do an automatic call setup is to have two of them, where one is setup to automatically accept calls, thereby initiating a call (and I know on the indoor intercom it's easy to disconnect the speaker and/or mic preventing any chance of feedback).


I'm not sure which would be better for picking up a room's audio, although I'd guess the first one would be.

Matthew Ballard
Network Manager
Otis College of Art and Design
mballard at otis.edu


From: Russell Chaseling <rchaseling at plannet21.ie<mailto:rchaseling at plannet21.ie>>
Date: Thursday, March 28, 2013 2:30 PM
To: "'cisco-voip at puck. net'" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: [cisco-voip] Room Recording using DMS

Hi,

We have a requirement for a room to be recorded in an Emergency situation using microphones, a conference phone or similar. Problem is this site has an Active DMS call recording solution built on VMware and they want calls to be recorded on this......we have been told by that we will need an analogue card which is obviously not an option with a virtualised infrastructure.

Has anyone got a similar setup or has any ideas on how we could achieve this?

The audio stream and call setup info from a Cisco IP phone using DMS is only sent to the recorder once the call actually connects.......The only option I can't think of is for these users to initiate a call from a 7937 to another 7937 in the same room (with volume turned down on both to avoid feedback) and record it this way - but I don't think this is an option as there are no speed dial buttons on 7937s so users would have to dial the number which is not going to fly for these guys in an emergency....they need a one button solution.

Russell