[cisco-voip] router selection......

Lelio Fulgenzi lelio at uoguelph.ca
Fri May 24 13:54:53 EDT 2013


that's a very good point Mike. most of the time the licenses are not transferable. sometimes modules are though, sometimes. ;) 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----
From: "Mike Norton" <mikenorton at pwsd76.ab.ca> 
To: "Scott Voll" <svoll.voip at gmail.com>, cisco-voip at puck.nether.net 
Sent: Friday, May 24, 2013 1:21:19 PM 
Subject: Re: [cisco-voip] router selection...... 




Add my vote for separating routing and voice. That way when you outgrow your routing capacity, you’re not forced to buy new voice gateway capabilities. Or vise-versa. 



Last summer I replaced all my ISR G1s with Layer 3 switches for WAN routing and 2901s for voice gateway. Now, next time we outgrow the routing capacity, we won’t have to buy new VWICs, SRST licensing, etc. because the voice gateway won’t need to change. Or when CUCM upgrades make the voice gateway IOS obsolete, we won’t need to buy new WAN routing. 



-mn 





From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll 
Sent: May-24-13 8:53 AM 
To: cisco-voip at puck.nether.net; cisco-nsp at puck.nether.net 
Subject: [cisco-voip] router selection...... 




Sorry for the cross post. But I wasn't sure which was the better forum to post in. 





I currently have a 2951 running voice, Security, VPN, and Data. it works really great for our current needs. BUT we are going to start pushing more that 300mbps and this router is only rated for 296mbps per the spec sheet. 





What is the next move up to support up to gig throughput and still support ZBFW, GRE, IPSEC, PRI's for Voice, and QoS at Gig speeds? 





Do I have to separate out my WAN (use an ASR) and then continue with the 2951 for my security / voice? 





What are my options? 





Thanks 





Scott 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130524/a6e7f0fb/attachment.html>


More information about the cisco-voip mailing list