[cisco-voip] Cisco CUPs virtulized OVA templates

[Matthew Loraditch]

The OVA just creates the VM with the correct settings, you need a bootable ISO.
It is possible to deploy an entire VM with an OVA and Cisco uses that method for some other products but not UC Apps.


Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of abbas Wali
Sent: Wednesday, May 29, 2013 8:15 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco CUPs virtulized OVA templates

HI all,
I am trying to install CUPs 8.5/8.6 using cisco OVA templates in ESXi 5.
This is first time I am doing so. I understood that we dont need an ISO if deploying an OVA template? is that correct.
I have tried many times and when it boots its just searches for an image on the network. I have changed the boot sequence to use Harddrive and also cdrom.
sounds like I am missing something Big time.

p.s. I have installed the ESXi inside vm workstation.
thanks


--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130529/36148512/attachment.html>