[cisco-voip] FXO Hunt Group, can't pickup 2nd call

[Jason Aarons (AM)]

Debug ccm-manager backhaul packets
Debug mgcp packet

When you answer on the IP phone do you see the MDCX come in from callmanager to the gateway, etc ?

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080174804.shtml

I suspect  your need both a capture from back of phone, ccm trace logs (translator), and the debugs from gateway.

Did you issue a mgcp bind xxxxxx command twice?  If you look in CCM Admin does the ip address of the MGCP endpoint match your bindings?  If seen this when they mis-matched.


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Wednesday, May 29, 2013 1:44 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXO Hunt Group, can't pickup 2nd call


Small site with 3 FXO lines in a carrier hunt. Gateway is MGCP controlled. Lines are setup loop start. Calls come in and ring to a broadcast hunt. First call comes in and rings and is answerable. Second call comes in, Caller hears normal ringing. My users get ½ ring try to pickup but can never get the call. ½ ring will continue indefinitely.
Anyone seen anything similar? I've not ever had the pleasure of this sort of setup before so I'm not sure what to look at.
Thanks!


Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>




itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130529/b7642cd1/attachment.html>