[cisco-voip] CUCM Export

[Matthew Loraditch]

Jump will be allowing 6.1.5 and 7.1.5 to be installed  in VMWare, thus allowing you to not have to upgrade a production cluster to 8.0.3. before going to 9.1
I haven't gotten a clear answer yet on what they are actually doing to make this work any differently than it functionally (but not supported) does now.


Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell Chaseling
Sent: Friday, May 31, 2013 11:01 AM
To: Nate VanMaren; 'Cisco-voip'
Subject: Re: [cisco-voip] CUCM Export

Cheers

I suspected this might the case with BAT files between the two. What is a "jump" upgrade?

From: Nate VanMaren [mailto:VanMarenNP at ldschurch.org]
Sent: 31 May 2013 15:52
To: Russell Chaseling; 'Cisco-voip'
Subject: RE: CUCM Export

The formats are different, so you will spend a very very long time fixing the bat csv files between the versions.

You might want to talk to your cisco se about "jump" upgrades, I think they'd fit your situation better.

Thanks,
-Nate

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell Chaseling
Sent: Friday, May 31, 2013 7:01 AM
To: 'Cisco-voip'
Subject: [cisco-voip] CUCM Export

Hi all,

Have a query regarding building a Call Manager from scratch using a BAT export from another. Basically have to upgrade a 6.1.3 cluster on hardware to 9.1 an VMware. This site is a 24/7 operation using Extension Mobility. To do the upgrade it will need to be in 3 steps.....upgrade 6.1.3 to 8.0.3....backup to VMware....refresh upgrade to 9.1. This is going to cause more outages than the site can tolerate.

My question is can anyone see any issues with taking a BAT Export of the config on 6.13 and then importing it on the a new build of 9.1 with same IP details / Hostname - then making sure all configuration is the same between the two and unplugging old and plugging in new?


1)      I would assume all user / application passwords / PINs would be lost

2)      Possible certificate issues (but as verion 6 doesn't have Security by Default) should be ok?

Anyone done an upgrade like this?

Thanks
Russell




NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130531/6e9a4d5b/attachment.html>