[cisco-voip] RTP on UDP fixed ports?

[Joe Martini]

This can be set for SIP phones only.  The setting is found under Device > Device Settings > SIP Profile.  Then "Start Media Port" and "Stop Media Port", this is the UDP port range to be used by SIP phones.

Joe

On Nov 6, 2013, at 5:31 AM, Ahmed -Y <yhameed81 at gmail.com> wrote:

Hi Guys,

I have a quick question. Can we configure CUCM or Avaya call processor so that when phones start RTP, they use the fixed ports instead of random from wide udp range?

Regards

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip