[cisco-voip] QED load for ATA-187

[Lelio Fulgenzi]

interesting. it doesn't really clarify that in the readme. i'll read it again. i'm hoping adding it doesn't hurt anything. ;) 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Brian Meade (brmeade)" <brmeade at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Wednesday, November 13, 2013 1:13:24 PM 
Subject: RE: [cisco-voip] QED load for ATA-187 



Lelio, 

It should just be a one-time thing unless there’s a new QED that comes out to add additional configuration options in CUCM. 

Brian 



From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, November 13, 2013 1:12 PM 
To: Brian Meade (brmeade) 
Cc: cisco-voip voyp list 
Subject: Re: [cisco-voip] QED load for ATA-187 



Thanks Brian, 

I've got the location and the file, and I'm just reading the readme. I'm just wondering, is it necessary to upload this new QED file each time a new firmware is updated? That's what the readme leads me to believe. 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519 ‐ 824 ‐ 4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----


From: "Brian Meade (brmeade)" < brmeade at cisco.com > 
To: "Lelio Fulgenzi" < lelio at uoguelph.ca >, "cisco-voip voyp list" < cisco-voip at puck.nether.net > 
Sent: Wednesday, November 13, 2013 1:09:39 PM 
Subject: RE: [cisco-voip] QED load for ATA-187 
Lelio, 

You can find that QED file at http://software.cisco.com/download/release.html?mdfid=283118514&flowid=46170&softwareid=282074215&release=9.2(3)&relind=AVAILABLE&rellifecycle=&reltype=latest 

It’s named cmterm-ata187-qed.9-2-3-1.cop.sgn 

It basically just adds the support for the 187 device in CUCM web pages and tells all about the product specific configuration details. 

Brian 




From: cisco-voip [ mailto:cisco-voip-bounces at puck.nether.net ] On Behalf Of Lelio Fulgenzi 
Sent: Wednesday, November 13, 2013 1:03 PM 
To: cisco-voip voyp list 
Subject: [cisco-voip] QED load for ATA-187 



Continuing with my firmware preparations, I noticed that for the ATA-187, there is a QED load that is required. Can anyone tell me what this is? It's more curious than anything. It says it's only necessary to install it on the publisher. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519 ‐ 824 ‐ 4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131113/73710c46/attachment.html>