[cisco-voip] two different layer 2 status indicators?

[Nate VanMaren]

Is it a BRI?  Or maybe it's a strange switch type.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Countryman, Edward
Sent: Thursday, November 14, 2013 2:28 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] two different layer 2 status indicators?

Does anyone know what might cause the Layer 2 status output of the SHOW ISDN STATUS command to reflect two different TEI 's  ??
What does SAPI = 6 mean ??

    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        TEI = 0, Ces = 1, SAPI = 6, State = TEI_ASSIGNED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask:  0x807FFFFF
    Number of L2 Discards = 0, L2 Session ID = 72


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131114/627d180d/attachment.html>