[cisco-voip] VG 202 integration VG202

[vignesh sethuraman]

Hello All,

I have integrated VG202 with CME using H323. The integration is through IP connectivity.

I can make calls from IPphone registered to CME to the Analog phone connected to VG202.

I could not hear any dial-tone when the Analog phone goes off-hook nor I can dial any Cisco IP phone connected to CME.  I tried to connect to different port on VG202, used different Analog phone, reloaded the VG202. No luck.

Please find below the config of  VG202.

voice service voip
 ip address trusted list
  ipv4 0.0.0.0 0.0.0.0
 allow-connections h323 to h323
 supplementary-service h450.12
 fax protocol pass-through g711alaw
 h323
 modem passthrough nse codec g711alaw
!
voice class h323 1
  h225 timeout tcp establish 3
!
voice-card 0

!
interface FastEthernet0/0

 ip address X.X.X.X 255.255.255.0
 duplex auto
 speed auto
 h323-gateway voip interface
 h323-gateway voip bind srcaddr X.X.X.X
!
interface FastEthernet0/1
 no ip address
 duplex auto
 speed auto
!
ip forward-protocol nd
!
no ip http server
ip route 0.0.0.0 0.0.0.0 X.X.X.X
!
control-plane

!
!
voice-port 0/0
 no supervisory disconnect lcfo
 ring frequency 20
 ring cadence pattern11
 disconnect-ack
 compand-type a-law
 cptone MY
 timeouts initial 60
 timeouts interdigit 60
 timeouts ringing infinity
 caller-id enable
!
voice-port 0/1
 no supervisory disconnect lcfo
 disconnect-ack
 compand-type a-law
 cptone MY
 timeouts initial 60
 timeouts interdigit 60
 timeouts ringing infinity
 timeouts power-denial 500
 caller-id enable
!
no ccm-manager fax protocol cisco
!

mgcp profile default
!
!
dial-peer voice 805 voip
 destination-pattern 0T
 modem passthrough nse codec g711alaw
 session target ipv4:X.X.X.X (CME IP)
 voice-class h323 1
 codec g711alaw
 fax protocol none
 no vad
!
dial-peer voice 4805 voip
 modem passthrough nse codec g711alaw
 incoming called-number .
 voice-class h323 1
 codec g711alaw
 fax protocol none
 no vad
!
dial-peer voice 1 pots
 destination-pattern 4805
 port 0/0
 forward-digits all
!
!
!
line con 0
 login local
 no modem enable
line aux 0
line vty 0 4
 login local
 transport input all
!
end
 
Thanks & Regards,
Vignesh S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131118/b9c1da91/attachment.html>