[cisco-voip] 8945 not taking changes on 9.1.1a

[Erick B.]

Yes. Factory defaulted phone also.

Other phone models take changes fine and stop working when they are deleted
from CUCM.
Servers have been rebooted to.

The phone took the firmware update fine, and the phone web page (status
message, debug display) show it downloading trust files fine and config sgn
file (HTTP) fine. No errors there about timeout downloading config files,
etc.



On Fri, Oct 18, 2013 at 11:38 AM, Heim, Dennis <Dennis.Heim at wwt.com> wrote:

> Have you tried clearing the security settings?****
>
> ** **
>
> *Dennis Heim | Solution Architect (Collaboration)*****
>
> World Wide Technology, Inc. | 314-212-1814****
>
> ** **
>
> *PS Engineering: ** Innovate & Ignite.*****
>
> * *
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Erick B.
> *Sent:* Friday, October 18, 2013 12:26 PM
> *To:* voip puck
> *Subject:* [cisco-voip] 8945 not taking changes on 9.1.1a****
>
> ** **
>
> Weird one here, anyone seen this before?****
>
> ** **
>
> Have a few 8945s that aren't taking changes. ****
>
> ** **
>
> DB replication shows 2 on all servers. ****
>
> ** **
>
> Weird thing is, if we delete the 8945 from CUCM the 8945 still registers
> and works with old extension and 8945 phone web page shows it is registered
> to the right call manager server and the phone can make calls with the
> phone not being in CUCM. ****
>
> ** **
>
> Have updated a few to current firmware version, same thing. ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131018/009b86e7/attachment.html>