[cisco-voip] SIP trunk putting call on hold drops call

[Kenneth Hayes]

I ran into this before. I think it's a bug in the IOS. What IOS are you running?

Sent from my iPhone

> On Oct 20, 2013, at 9:37 PM, "Mike " <mikeeo at msn.com> wrote:
> 
> I have a SIP trunk from Windstream  where if I put the call on hold it drops the call. If I check MTP required it works fine. I have a transcoder and IOS software MTP configured and in the MRGL on the Trunk config.  
>  
> Any ideas?
>  
> Thanks,
> Mike
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131020/d0e75be9/attachment.html>