[cisco-voip] SIP trunk putting call on hold drops call

[Mark Holloway]

A SIP Wireshark capture would be helpful both with and without the MTP enabled. 

On Oct 20, 2013, at 9:37 PM, Mike <mikeeo at msn.com> wrote:

> I have a SIP trunk from Windstream  where if I put the call on hold it drops the call. If I check MTP required it works fine. I have a transcoder and IOS software MTP configured and in the MRGL on the Trunk config.  
>  
> Any ideas?
>  
> Thanks,
> Mike
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131021/c3a6da36/attachment.html>