[cisco-voip] Migrating from CUCM 7.1 & Unity to BE6000

[Robin Clayton]

Dear All.

CUCM 7.1.x
Unity 7.1.x

Is there a guide on migrating these to a BE6000 server retaining the configuration?

I looked but I could not find a guide.

Is there any advantage of the BE6000 over a UCS with CUCM and Unity installed on it?

The environment only require less than 200 phones.

Cheers
Rob





Robin Clayton
Senior I.T. Technician
Richard Rose Federation
Richard Rose Central Academy
Victoria Place
Carlisle
CA1 1LY




--------------------------------------------------------------------------------------------------------------

Important Notice:

This e-mail and any attachment are confidentialand may be privileged
or otherwise protected from disclosure. It is solely intended for the
person(s) named above. If you are not the intended recipient, any
reading, use, disclosure, copying or distribution of all or parts of this
e-mail or associated attachments is strictly prohibited. If you are not
an intended recipient, please notify the sender immediately by
replying to this message or by telephone and delete this e-mail and
any attachments permanently from your system.

The Richard Rose Federation<http://www.rrfa.org.uk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131022/f5bc638e/attachment.html>