[cisco-voip] Odd one-way/no audio issues with just one user

[Jason Aarons (AM)]

You got a needle in the haystack.

I would enable the QRT Softkey to help and the QRT features in RTMT, I would also enable debug mgcp packet to syslog, that would show packets sent and packets received for each call.  Once you get a QRT report you need to pull the timestamps from CAR on a bad QRT call and then pull the CCM Trace file using the CAR timestamp to narrow down the range, then view the trace files in TranslatorX.  Make sure you've enabled diagnostic CDRs and CDRs for zero length.

http://www.youtube.com/watch?v=FZl6Ib8zMoI

http://blog.ine.com/2012/03/19/troubleshooting-mgcp-part-2/

PS is packets sent and PR is packets received

MGCP Packet sent to 177.1.10.12:2427--->
250 260 OK
P: PS=974, OS=155840, PR=981, OR=156960, PL=1, JI=3, LA=0
<---

-jason


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
Sent: Tuesday, September 17, 2013 4:36 PM
To: Norton, Mike
Cc: voip puck
Subject: Re: [cisco-voip] Odd one-way/no audio issues with just one user


They are real callers. They call back and the second calls works fine.

On Tue, Sep 17, 2013 at 3:19 PM, Norton, Mike <mikenorton at pwsd76.ab.ca<mailto:mikenorton at pwsd76.ab.ca>> wrote:
Maybe this is too obvious, but... are you sure the outside caller is saying anything? Maybe this one user has gotten their number on some spammer's list and they are receiving dead-air calls from an autodialer/fax/etc.

-mn


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Erick B.
Sent: September-17-13 12:45 PM
To: Ryan Ratliff (rratliff)
Cc: voip puck
Subject: Re: [cisco-voip] Odd one-way/no audio issues with just one user

A packet capture from the phone shows the RTP stream with no audio. The operator gets calls from all locations though so the problem calls come in multiple PRIs and not just one so can't pinpoint it to a particular gateway / PRI issue. A majority of the calls do come in the same gateway though and the PRI is clean (no errors). Let me look through the CMR records for some problem calls. I do have a TAC case on this also. Just looking for some more ideas as I've tried almost everything and this is pretty odd.

On Tue, Sep 17, 2013 at 1:09 PM, Ryan Ratliff (rratliff) <rratliff at cisco.com<mailto:rratliff at cisco.com>> wrote:
What do the CMR records say about those calls?

-Ryan

On Sep 17, 2013, at 12:51 PM, Erick B. <erickbee at gmail.com<mailto:erickbee at gmail.com>> wrote:

Hi,

Anyone have any ideas on this?

Older system, CUCM 6.1.1a (no SUs) that has been running fine for years and past 2-3 months only one user is having problems with no audio or one way audio on calls. The IP Phone user can't hear the outside caller. External calls have issue mostly. Problem happens 1-2 times a day.

We have replaced the 7962 phone, headset, put it in another switch port. Updated firmware to 8.5.2 (latest compatibile with 6.1 per docs). I have updated the IOS on the MGCP voice gateway from 12.4(15)T4 to 12.4(15)T17 and that fixed a duplicate DTMF issue (user was hearing DTMF tones on some calls) and also seemed to help the problem calls as there are less since the IOS upgrade but still 2-3 a day compared to a dozen or so before the IOS upgrade.

I haven't been able to duplicate the issue with several hundred calls in, it is very sporadic.

I know the CCM version is old, thinking about applying latest SUs for 6.1 until the client can update to newer hardware. Just strange only one user having this problem. We checked around several times.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip




itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130917/1b54bcb2/attachment.html>