[cisco-voip] Change Cisco Emergency Responder 9.0 IP...

[Brian Meade (brmeade)]

Jonathan,

Here's the guide for CER 9.0: http://www.cisco.com/en/US/partner/products/sw/voicesw/ps842/products_tech_note09186a0080c13fb6.shtml

Full version list available here- http://www.cisco.com/en/US/partner/products/sw/voicesw/ps842/prod_tech_notes_list.html

Brian

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Thursday, September 19, 2013 2:41 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Change Cisco Emergency Responder 9.0 IP...

Staged CER 9.0.2.10000-1 on our test network, need to change IP to deploy to customer and after following these instructions:

http://www.cisco.com/en/US/products/sw/voicesw/ps842/products_tech_note09186a0080c13fb6.shtml

Link is for changing IP on 8.6.1, but could not find any better instructions for 9.0


After a reboot, I just get a 500 Internal Server error going to the login page.

I change the IP back and it works fine...

What am I doing wrong?



Jonathan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130919/d5bede5d/attachment.html>