[cisco-voip] Sharp F0-4400 Fax machine how to disable SuperG3?

[Lelio Fulgenzi]

our MFPs have no speed setting that is user configurable. 

i had to call the service tech to give us the special key sequence that puts it into service mode and then key in a few numbers that puts it into 14400bps. 

these _might_ be similar. 




--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Data Centre and Communications Facilities 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> 
To: "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net> 
Sent: Tuesday, September 24, 2013 1:03:59 PM 
Subject: [cisco-voip] Sharp F0-4400 Fax machine how to disable SuperG3? 



I found the setting for ECM to disable, but how can I knock down the fax rate on a Sharp F0-4400? I can’t find a setting for it in the manual. 

What are the odds someone one here has this model sharp! –jason 

We can hear the fax machine dial but it doesn’t negotiate with the far end. We can send to other fax machines and eFax with no issues. My plan was to disable ECM and lock the machine to 9600 baud. Using a VG224/MGCP T38 to T.38/SIP CUBE with CallManager 9.1 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130924/e7a67be1/attachment.html>