[cisco-voip] Informacast Basic Paging 8.3 to SIP 7965 (CCM 9.1)

[Jason Aarons (AM)]

So Cisco TAC is stumped.

If I used a filter of Device Pool on a Informacast Recipient Group it worked.

Next hurdle is calling the CTI Route Point I hear;

Welcome to the  Singlewire Informacast System...ding..ding
Were sorry no devices could be activated. Your broadcast will not be completed.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Thursday, September 26, 2013 12:20 PM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] Informacast Basic Paging 8.3 to SIP 7965 (CCM 9.1)


Informcast 8.3 (with CallManger 9.1) isn't finding one of my SIP 7965s?  Several SIP 6945s are showing up.

Any known issues with SIP? I setup the CTI ports as SCCP, maybe it's mandatory to setup a SIP Trunk instead??

I also noticed a warning that not all my phones in callmanager were discovered. "There are more phones associated with your Communications Manager server than your InformaCast license key<https://10.16.32.43:8444/InformaCast/admin?cmd=manage-key&seq=pr:1f> supports. Broadcast messages will be limited to 50 total phones. The number of phones in the list that will participate in a broadcast depends on how many other phones have been broadcast participants. For example, if 50 other phones have been broadcast participants, then no phones in the list can participate. Otherwise, either all or some of the phones can participate."

I know I'm limited to a broadcast group of 50 phones, but I didn't think the size of the cluster mattered?


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130926/6ca00291/attachment.html>