[cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

[Heim, Dennis]

I just did a 5.1(3g) -> 6.1(5) -> 7.1(5) -> 9.1(1) not that long ago. It is not a jump upgrade. I did try it to 9.1(2) at one point. It seemed to work, but you have unaligned partitions. You would need to do drs backup and restore.  I noticed with the 9.1(1) recovery disk there is the option to align partitions. I wonder if that is a way around rebuilding. I think a fresh backup and restore at the end is a good measure anyway.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike
Sent: Thursday, September 26, 2013 3:29 PM
To: 'Cisco VOIP'
Subject: [cisco-voip] Jump upgrade: 4.1.3>7.1.5b > 9.1.2

Couple questions.

I DMA'd to 7.1.5b on 7825 then DRS out to 7.1.5b in vmware .

Question is I don't have a bootable copy of 9.1.2 so I was going to upgrade 7.1.5 vm using non-bootable and do the fresh install with 9.1.1 with an upgrade during install to 9.1.2.

Is this supported?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130926/649fb38e/attachment.html>