[cisco-voip] MTP allocation failure - CDDR cause code 47

[Justin Steinberg]

Any change device mobility could be in play for this user changing the
device pool/region ?


On Fri, Apr 18, 2014 at 11:12 AM, Brian Meade <bmeade90 at vt.edu> wrote:

> There's some scenarios where you do not get a media resource list
> exhausted alert.  One scenario is where the CCM service has an incorrect
> count of available resources and you just see the MTP fail to send an
> OpenReceiveChannelAck or send one saying it failed to open a port.  In that
> case, CUCM didn't think the media resources were actually exhausted so no
> alert.
>
> We'll need to see CCM traces for one of these calls to see what is
> actually happening.  Have you tried resetting the MTP?
>
> Brian
>
>
> On Fri, Apr 18, 2014 at 10:55 AM, Erick Wellnitz <ewellnitzvoip at gmail.com>wrote:
>
>> Ryan,
>>
>> When you mention stuck sessions do you mean x number of stuck sessions
>> preventing further allocation of resources or this particular device has a
>> stuck session?
>>
>> If it were the first scenario, wouldn't I get a media list exhausted
>> alert from RTMT?
>>
>>
>>
>>
>> On Fri, Apr 18, 2014 at 7:36 AM, Ryan Ratliff (rratliff) <
>> rratliff at cisco.com> wrote:
>>
>>>  Stuck sessions on the MTP perhaps or leaked calls in UCM?
>>>
>>>  You're going to have to dig into traces to confirm.
>>>
>>> -Ryan
>>>
>>>  On Apr 17, 2014, at 10:52 PM, Erick Wellnitz <ewellnitzvoip at gmail.com>
>>> wrote:
>>>
>>>  Well, identical except for MAC and description.
>>>
>>>  It worked for three days now it fails.  The last successful call
>>> allocated the MTP without issue.
>>>
>>>  I personally tested it a dozen or so times before giving it back to
>>> the user.
>>>
>>>
>>> On Thu, Apr 17, 2014 at 9:45 PM, Erick Wellnitz <ewellnitzvoip at gmail.com
>>> > wrote:
>>>
>>>> Super copy identical.
>>>>
>>>>
>>>> On Thu, Apr 17, 2014 at 4:33 PM, Ryan Ratliff (rratliff) <
>>>> rratliff at cisco.com> wrote:
>>>>
>>>>> 47 = codec mismatch
>>>>>
>>>>> Is it _really_ identical?
>>>>>
>>>>> -Ryan
>>>>>
>>>>> On Apr 17, 2014, at 4:02 PM, Erick Wellnitz <ewellnitzvoip at gmail.com>
>>>>> wrote:
>>>>>
>>>>> I have a VPN phones configured to use a trused relay point in order to
>>>>> provide connectivity to other VPN phones.
>>>>>
>>>>> One of the phones gets fast busy and traces show MTP allocation
>>>>> failure.  This was the only phone trying ot utilize this MTP and is
>>>>> identical to other VPN phones that work as expected.
>>>>>
>>>>> Any ideas?
>>>>>
>>>>>
>>>>> Thanks!
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140418/83d16a9e/attachment.html>