[cisco-voip] ATA 190?

[Leslie Meade]

They look exactly the same including the gui, and you have to install a COP file to get them to run. Even 10.5 does not have them included by default.



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Meade
Sent: Thursday, August 14, 2014 9:03 AM
To: Matthew Loraditch
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ATA 190?

I think it was a cost savings thing.  The new ATA 190 runs on the same hardware as the SPA112 I believe.

On Thu, Aug 14, 2014 at 11:45 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>> wrote:
So apparently this is the new ATA model and 187s are End of Sale this year. Are there any actual improvements between the 187 and this? Was it just a component shortage, perhaps?

Thanks!


Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
1965 Greenspring Drive
Timonium, MD 21093

direct voice. 443.541.1518<tel:443.541.1518>
fax.  410.252.9284<tel:410.252.9284>

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>
Support Phone. 410.252.8830<tel:410.252.8830>



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140814/006ecb6a/attachment.html>