[cisco-voip] hardware alarms in CUCM / UCCx / Connection v9 - where to set?

[Charles Goldsmith]

I think most people use VMWare to alert to hardware issues, since the
applications don't have visibility into the host server info.


On Tue, Aug 26, 2014 at 12:44 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> We've had a couple of hard drives go and we've only noticed because we saw
> an amber light when we've walked by. Where do I set this type of alarm up?
> We're getting application alarms but not these.
>
> Is there a log I can download to see when the drive went bad?
>
> We're live with CUCM and UCCx v9 now. So those are the answers I'm looking
> for short term.
>
> Lelio
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140826/d180b23d/attachment.html>