[cisco-voip] hardware alarms in CUCM / UCCx / Connection v9 - where to set?

[Brian Meade]

You're on physical servers, right Lelio?

I would check the syslogs using the syslog viewer in RTMT and see if
anything is in there showing the failure.  If so, you can set up remote
syslog.

Brian


On Tue, Aug 26, 2014 at 2:44 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> We've had a couple of hard drives go and we've only noticed because we saw
> an amber light when we've walked by. Where do I set this type of alarm up?
> We're getting application alarms but not these.
>
> Is there a log I can download to see when the drive went bad?
>
> We're live with CUCM and UCCx v9 now. So those are the answers I'm looking
> for short term.
>
> Lelio
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140826/def5433a/attachment.html>