[cisco-voip] Avaya PRI to CUBE to Percipia

[Brian Meade]

I'm not super familiar with the gateways but I know I've got some gateway
guys at Avaya that were able to do it straight from there.

On Thu, Dec 4, 2014 at 3:42 PM, Mike <mikeeo at msn.com> wrote:

> They are using list trace. Any other way to pull digits ?
>
> Sent from my iPhone
>
> On Dec 4, 2014, at 3:26 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
> Where are the Avaya guys observing the 13 digits?  A lot of them don't
> actually check it on the gateway and just rely on a "list trace" in CM and
> don't look on the actual gateway.
>
> On Thu, Dec 4, 2014 at 3:15 PM, Mike <mikeeo at msn.com> wrote:
>
>>
>>
>> Hey all I’m running into a problem where I can’t make international calls
>> through an Avaya switch nor can I get DTMF from the Avaya, but 7,10 and 11
>> digit dialing works fine. DTMF from Percipia through the CUBE into Avaya
>> works fine.  Of course the Avaya guys are blaming Cisco, but I can see all
>> 15 digits passing to the PRI to Avaya with a q931 debug. The Avaya
>> engineers are only seeing 13 digits. I’ve changed the isdn type and plan
>> from unknown to international and still no go.
>>
>>
>>
>> Has anyone ever seen this before?
>>
>>
>>
>> Thanks,
>>
>> Mike
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141204/ea461110/attachment.html>