[cisco-voip] 7915 showing MWI when set to none

[NateCCIE]

Is the phone have working tftp?  Maybe an ITL problem.  Thinking it's not getting a good config to tell it to disable. 

Sent from my iPhone

> On Dec 16, 2014, at 2:56 PM, Erick Wellnitz <ewellnitzvoip at gmail.com> wrote:
> 
> It turns off both appearances on both phones.  All the other shared lines stopped displaying MWI as expected when setting visual MWI policy to None except this one.
> 
>> On Tue, Dec 16, 2014 at 2:27 PM, Jason Aarons (AM) <jason.aarons at dimensiondata.com> wrote:
>> Assuming voicemail is SCCP did you try dialing the MWI off number on the phone? Other option is to run a MWI sync from voicemail.
>> 
>>  
>> 
>> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Wellnitz
>> Sent: Tuesday, December 16, 2014 3:46 PM
>> To: cisco-voip
>> Subject: [cisco-voip] 7915 showing MWI when set to none
>> 
>>  
>> 
>>  
>> 
>> I have one phone, a 7962 with 1 7915 - 24 button (SCCP42.9-3-1SR3-1S for the phone and
>> 
>> B015-1-0-4-2 for the 7915) where one line is set to none for MWI but it still shows the flashing icon.  I've removed and added the line, checked the database across all nodes and it is the appropriate value.
>> 
>>  
>> 
>> Anyone run across this and figured out a solution?
>> 
>>  
>> 
>> Thanks for any insight!
>> 
>>  
>> 
>> 
>> 
>> itevomcid
>> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141216/4bb52c91/attachment.html>