[cisco-voip] Consolidate two separate UCCX cluster and migrate to 9.x

[Charles Goldsmith]

Kevin, not supported to run them both at the same time, unless 10.6 has
indeed changed that, I haven't perused the docs yet.

On Thu, Dec 18, 2014 at 5:02 PM, Kevin Przybylowski <kevinp at advancedtsg.com>
wrote:
>
>  Do you mean the last version?  They’ve been together the last few
> revisions.
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Mike
> *Sent:* Thursday, December 18, 2014 6:22 PM
> *To:* Josh Warcop
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Consolidate two separate UCCX cluster and
> migrate to 9.x
>
>
>
> UCCX 10.6 supports CAD and Finesse as ️Co-resident and rumor has it that
> is the only version that will support this configuration so plan
> accordingly.
>
> Sent from my iPhone
>
>
> On Dec 18, 2014, at 3:17 PM, Josh Warcop <josh at warcop.com> wrote:
>
>   First - your target version should be the 10.6 release which is
> Communications Manager 10.5.2 and CCX 10.6.1.
>
> You merging of UCCX should also include going to Finesse and dropping CAD.
>
> If you have a non-overlapping dial plan the merging is simple. However if
> you have to do a lot of dial plan work it can be a good challenge.
>
> In this case I would support the decision to build fresh and merge into
> one new cluster. This will allow you to build new dial plans, new UCCX
> integration, and move site by site or by application.
>
> Sent from my Windows Phone
>   ------------------------------
>
> *From: *Ashwani R <ashwani at ranpise.com>
> *Sent: *‎12/‎18/‎2014 8:39 AM
> *To: *cisco-voip at puck.nether.net
> *Subject: *[cisco-voip] Consolidate two separate UCCX cluster and migrate
> to 9.x
>
> Team,
>
> I have a customer who has two separate UCCX HA cluster with their
> respective CUCM cluster (merging two companies).  They would like to merge
> both CUCM and UCCX cluster to one cluster and upgrade them to 9.x.  They
> are running CUCM version *7.1.3.10000-11* and UCCX cluster running *
> 7.0(2) Build254*.  What is the best way to do this? Can they keep both
> historical data from UCCX and move them to 9.x ?  I know this is not
> possible but just want to see if anyone has done it before.  We have
> already built new 9.x CUCM and UCCX cluster with new set of IP addresses
> with blank configurations. Any help will be appreciated.
>
> Thanks,
>
> Ashwani
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141218/44196057/attachment.html>