[cisco-voip] jump upgrade "license disabling" step...

[Lelio Fulgenzi]

thanks. this is good information everyone. 

what a great list. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Ryan Ratliff (rratliff)" <rratliff at cisco.com> 
To: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> 
Cc: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Henry Gicheru (KE)" <Henry.Gicheru at ke.dimensiondata.com>, "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net> 
Sent: Monday, February 3, 2014 4:29:30 PM 
Subject: Re: [cisco-voip] jump upgrade "license disabling" step... 


In that case the DRS restore before the cop file install is what got you. You have to install the cop before the restore for it to work. 

Sent from my iPhone 

On Feb 3, 2014, at 3:35 PM, "Jason Aarons (AM)" < jason.aarons at dimensiondata.com > wrote: 






In my case 7.1.5 was a DRS restored to a lab VM. Shutdown then snapshot. Booted. Then the cop files applied. Then shutdown for a snapshot. Then booted. Then went to run the 9.1.2 upgrade when I got the error and setup a root support account to correct the bug. 

In the lab I use snapshots should I need to-retest some part of the process later. 




From: Lelio Fulgenzi [ mailto:lelio at uoguelph.ca ] 
Sent: Monday, February 03, 2014 10:55 AM 
To: Jason Aarons (AM); Henry Gicheru (KE) 
Cc: cisco-voip ( cisco-voip at puck.nether.net ) 
Subject: Re: [cisco-voip] jump upgrade "license disabling" step... 



Hello Henry, Jason; 

Can you confirm whether you applied the COP refresh on physical hardware? 

Thanks! 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519 ‐ 824 ‐ 4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----


From: "Jason Aarons (AM)" < jason.aarons at dimensiondata.com > 
To: "Henry Gicheru (KE)" < Henry.Gicheru at ke.dimensiondata.com >, "Henry Gicheru (KE)" < Henry.Gicheru at ke.dimensiondata.com >, "Lelio Fulgenzi" < lelio at uoguelph.ca >, "cisco-voip ( cisco-voip at puck.nether.net )" < cisco-voip at puck.nether.net > 
Sent: Monday, February 3, 2014 9:15:57 AM 
Subject: RE: [cisco-voip] jump upgrade "license disabling" step... 
I used ciscocm.refresh_upgrade_v1.3.cop.sgn prior to upgrading and still encountered that bug. Fix was to have TAC root in and rename the file in the bugid. 




From: cisco-voip [ mailto:cisco-voip-bounces at puck.nether.net ] On Behalf Of Henry Gicheru (KE) 
Sent: Monday, February 03, 2014 5:08 AM 
To: Henry Gicheru (KE); Lelio Fulgenzi; cisco-voip ( cisco-voip at puck.nether.net ) 
Subject: Re: [cisco-voip] jump upgrade "license disabling" step... 

The bug ID is CSCuj10105 and COP v1.3 does the trick. 




Regards, 
Henry Gicheru 
Dimension Data East Africa 
Cell: +254(0)733 477 307 



"Henry Gicheru (KE)" < Henry.Gicheru at ke.dimensiondata.com > wrote: 


Hi lelio, 

I have done this and you have to do the latest cop version 1.3 for the "licensing disabling" otherwise the other cop versions will bring an error that "upgrade is prohibited in License Grace Period" 

Do the cop file install before you restore the backup. 

There is a bug to that effect of Cop version. 


Regards, 
Henry Gicheru 
Dimension Data East Africa 
Cell: +254(0)733 477 307 



Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 





I'm performing a "modified" jump upgrade from v7 to v9, in so much as that we are using physical hardware as the target, not VMs. I asked this a couple of times during webinars and our account team, and there were no red flags raised. 

I just want to be sure that the "licensing disabling" step, the step that allows me to reinstall v7 on the servers and upgrade them without having to rehost, is covered by installing the refresh upgrade (RU) COP file. 

I'm going to re-read the jump upgrade document again in more detail, but from the few times I have read it, there was no mention of any other software to disable the licensing. 

Lelio 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519 ‐ 824 ‐ 4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 



itevomcid 



<blockquote>

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

</blockquote>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140203/09ba1a11/attachment.html>