[cisco-voip] Transcoding on a CME for a CUE

Zoltan.Kelemen at Emerson.com Zoltan.Kelemen at Emerson.com
Fri Feb 7 11:10:05 EST 2014


Here you go:

ETUSSUNCME01#sh sccp
SCCP Admin State: UP
Gateway Local Interface: GigabitEthernet0/0
        IPv4 Address: 10.193.35.2
        Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.193.35.2, Port Number: 2000
                Priority: 1, Version: 7.0, Identifier: 1

Conferencing Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.193.35.2, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 1
Reported Max Streams: 32, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g729br8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
TLS : ENABLED

Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.193.35.2, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 2
Reported Max Streams: 14, Reported Max OOS Streams: 0
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: g729br8, Maximum Packetization Period: 60
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

ETUSSUNCME01#sh dspfarm all
Dspfarm Profile Configuration

 Profile ID = 2, Service = TRANSCODING, Resource ID = 2  
 Profile Description :  
 Profile Service Mode : Non Secure 
 Profile Admin State : UP 
 Profile Operation State : ACTIVE 
 Application : SCCP   Status : ASSOCIATED 
 Resource Provider : FLEX_DSPRM   Status : UP 
 Number of Resource Configured : 7 
 Number of Resource Available : 7
 Codec Configuration: num_of_codecs:6 
 Codec : g729r8, Maximum Packetization Period : 60 
 Codec : g729br8, Maximum Packetization Period : 60 
 Codec : g711ulaw, Maximum Packetization Period : 30 
 Codec : g711alaw, Maximum Packetization Period : 30 
 Codec : g729ar8, Maximum Packetization Period : 60 
 Codec : g729abr8, Maximum Packetization Period : 60
Dspfarm Profile Configuration

 Profile ID = 1, Service = CONFERENCING, Resource ID = 1  
 Profile Description :  
 Profile Service Mode : Non Secure 
 Profile Admin State : UP 
 Profile Operation State : ACTIVE 
 Application : SCCP   Status : ASSOCIATED 
 Resource Provider : FLEX_DSPRM   Status : UP 
 Number of Resource Configured : 4 
 Number of Resource Available : 4
 Maximum conference participants : 8
 Codec Configuration: num_of_codecs:6 
 Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required 
 Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required 
 Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required 
 Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required 
 Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required 
 Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required


SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    1   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        
0    2   28.3.1   UP     N/A  FREE  conf    1      -         -         -        
0    2   28.3.1   UP     N/A  FREE  conf    1      -         -         -        
0    2   28.3.1   UP     N/A  FREE  conf    1      -         -         -        
0    2   28.3.1   UP     N/A  FREE  conf    1      -         -         -        
0    2   28.3.1   UP     N/A  FREE  xcode   2      -         -         -        

Total number of DSPFARM DSP channel(s) 11

Regards,

Zoltan Kelemen
Global Communications and Information Security 
Implementation Engineering
Emerson


-----Original Message-----
From: Brian Meade (brmeade) [mailto:brmeade at cisco.com] 
Sent: Friday, February 07, 2014 8:33 AM
To: Kelemen, Zoltan [CORP/RO]; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Transcoding on a CME for a CUE

Zoltan,

It looks to me like maybe the transcoder isn't actually registered.  Can you provide the "show sccp" and "show dspfarm all" output?

Brian

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Zoltan.Kelemen at Emerson.com
Sent: Friday, February 07, 2014 9:27 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transcoding on a CME for a CUE

Hi,

Incoming codec is g.729. It does not show up in the config since that is the default setting on a dial-peer.

I'm well aware, that the two codecs differ, I have no choice (WAN is strictly g729, CUE is g711 only). That is why I have transcoding set up, see my original email in the thread. 
I'm also aware that the call fails, because of codec mismatch.

My problem is why? Why does the configured transcoding NOT work as expected?
This will probably end up a TAC case early next week as I'm traveling right now, just wanted to get some opinions if I was doing anything obviously wrong and if I've missed something.

Zoltan Kelemen
Global Communications and Information Security Implementation Engineering Emerson

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andreas Sikkema
Sent: Friday, February 07, 2014 3:24 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transcoding on a CME for a CUE

Zoltan,

> The attached trace should have those debugs and more.
>
>
>
> Caller: +13***531042
> Called: +19***465067
>
> Forwarded to voicemail extension: 5110

Zoltan, the incoming call is G.729 only and all dialpeers in your config appear to be G.711 only.


--
Andreas Sikkema
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list