[cisco-voip] dial into ddi and get a secondary dial tone to call a new number

[Buchanan, James]

Not really. Some have done this using call handlers with pre-programmed speed dials. Some have also tried changing the restriction tables in Unity to allow for this, but that has a tone of security issues. UCCX would be your best place to do this, but you would want to make sure you secured it with a PIN.

James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com



PRESIDIO
Practical thinking for a connected world.


Follow Us: www.twitter.com/presidio




________________________________________
From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of abbas Wali [abbaseo at gmail.com]
Sent: Tuesday, February 11, 2014 4:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] dial into ddi and get a secondary dial tone to call a     new number

hi all,

is there a feature in CUCM 8.5 where you call into a tollfree number into cucm cluster and then from there you call out to different destinations i.e. getting a secondary dialtone after the first call connects

Thanks


--

This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.