[cisco-voip] S2 Netbox and CUCM

[Ryan Huff]

You should be able to setup a standard SIP trunk and point a route pattern at Netbox through the trunk. Then just put a SD to the RP on a phone.

Sent from my iPhone

> On Feb 12, 2014, at 12:13 PM, Ben Story <ben.story at gmail.com> wrote:
> 
> Has anyone ever done any integration between S2 Netbox security and Cisco IP phones?  Specifically we would like to be able to have an extension or button on a phone open a door.
> --
> Ben Story 
> CCSP, CCNA, CCNA Wireless, CCDA
> ben.story at gmail.com
> @ntwrk80
> http://showbrain.blogspot.com
> http://rand0mw0rds.blogspot.com
> 
> 
> "From sour-faced saints and silly devotions, good Lord, preserve us!". -- St. Teresa of Avila
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140212/0ca98096/attachment.html>