[cisco-voip] PVDM3 is it based on C5510?

Lelio Fulgenzi lelio at uoguelph.ca
Thu Feb 27 12:28:56 EST 2014


does this help? 


router#show inventory 
NAME: "CISCO3945-CHASSIS", DESCR: "CISCO3945-CHASSIS" 
<snip> 
NAME: "PVDM3 DSP DIMM with 256 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 256 Channels" 
PID: PVDM3-256 , VID: V01 , SN: FOC16146REK 
<snip> 

router #show voice dsp capabilities slot 0 dsp 4 
DSP Type: SP2600 -43 
Card 0 DSP id 4 Capabilities: 
Credits 645 , G711Credits 15, HC Credits 32, MC Credits 20, 
FC Channel 43, HC Channel 20, MC Channel 32, 
Conference 8-party credits: 
G711 40 , G729 92 , G722 92 , ILBC 129 
Secure Credits: 
Sec LC Xcode 20, Sec HC Xcode 35, 
Sec MC Xcode 26, Sec LC UNIV Xcode 20, 
Sec HC UNIV Xcode 64,Sec MC UNIV Xcode 35, 
Sec G729 conf 129, Sec G722 conf 129, Sec ILBC conf 161, 
Sec G711 conf 71 , 
Max Conference Parties per DSP: 
G711 128, G729 56, G722 56, ILBC 40, 
Sec G711 72, Sec G729 40, 
Sec G722 40 Sec ILBC 32, 
Voice Channels: 
g711perdsp = 43, g726perdsp = 32, g729perdsp = 20, g729aperdsp = 32, 
g723perdsp = 0 , g728perdsp = 20, g711_5msperdsp = 28, gsmamrnbperdsp = 20, 
ilbcperdsp = 20, isacperdsp = 10, modemrelayperdsp = 20, 
g72264Perdsp = 32, h324perdsp = 20, 
m_f_thruperdsp = 43, faxrelayperdsp = 32, 
maxchperdsp = 43, minchperdsp = 20, 
srtp_maxchperdsp = 27, srtp_minchperdsp = 14, faxrelay_srtp_perdsp = 14, 
g711_srtp_perdsp = 27, g729_srtp_perdsp = 14, g729a_srtp_perdsp = 24 
gnx64_srtp_perdsp = 27 





--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> 
To: "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net> 
Sent: Thursday, February 27, 2014 9:01:50 AM 
Subject: [cisco-voip] PVDM3 is it based on C5510? 



PVDM3 is it a C5510 chipset? 

Does it a have a TI chipset nomenclature? 

I don’t have access to a x9xx to show voice dsp right now. 

This doesn’t really say. 
http://www.cisco.com/c/en/us/td/docs/routers/access/1900/software/configuration/guide/Software_Configuration/pvdm3_config.pdf 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140227/ca6c66ce/attachment.html>


More information about the cisco-voip mailing list