[cisco-voip] Incoming calls from CUBE to CUCM not dropped after caller disconnected the call

[Deepak Maggo]

Hi,

My call flow is:

PSTN =>VOIP Service Provider ==> SIP Trunk ==> CUBE ==> SIP Trunk ==> CUCM

Now if someone calls the DID numbers configured on CUCM then call keeps on
ringing even after caller disconnected the call and after caller
disconnected the incoming call if someone picks up that call on I phone it
shows as connected.

*Dial-Peer Conf on CUBE:*

dial-peer voice 200 voip
 description Incoming dialpeer and 1+10 digits to FlowRoute.com
 translation-profile outgoing FlowRoute_in
 destination-pattern ^1[2-9]..[2-9]......$
 voice-class codec 1
 session protocol sipv2
 session target sip-server
 dtmf-relay rtp-nte
!
dial-peer voice 201 voip
 description 10-digit local calls to FlowRoute.com
 translation-profile outgoing FlowRoute_in
 destination-pattern ^[2-9]..[2-9]......$
 voice-class codec 1
 session protocol sipv2
 session target sip-server
 dtmf-relay rtp-nte
!
dial-peer voice 300 voip
 description 180188912XX calls to CUCM
 destination-pattern ^180188912..$
 voice-class codec 1
 session protocol sipv2
 session target ipv4:XX.XX.8.70
 incoming called-number .T
 dtmf-relay rtp-nte
!

SIP trunk on CUCM is with default configurations. Please advise.
*Thanks & Regards,*
*Deepak Maggo*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140106/bea24880/attachment.html>