[cisco-voip] CM v9 limiting call duration

[Mark Holloway]

The Acme Packet SBC has a feature called “flow-time-limit” which allows you to set time limits to calls (in seconds). Once the value is reached the SBC will force the call to end by gracefully sending SIP BYE messages on both sides of the network. I am not aware of anything like this in CUBE. 

On Jan 7, 2014, at 8:04 AM, khaled Saholy <khaled_saholy at hotmail.com> wrote:

> Hi All,
> 
> I just have a request from our customer about a feature exists in Legacy PABX which is limiting call duration to a PSTN destination (for example, mobile calls) to a specified time like 30 minutes or more or less according to the customer needs.
> 
> I haven't come to a solution in CM 7 or 8 but if there's any idea about it in these versions or the latest 9.x , I'll be thankful for that.
> 
> Waiting for your inputs.
> 
> Thanks and Regards.
> 
> Khaled Al-Saholy
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140108/deaf4096/attachment.html>