[cisco-voip] Migrating from v7 to v9 (same cluster IPs) - getting phones to recognize new v9 cluster

[Lelio Fulgenzi]

ok, i needed to wait, just a bit longer... 8 1/2 minutes before the phones re-request their cnf file. 

I'm still interested in hearing what others have done. 

----- Original Message -----

From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Thursday, January 23, 2014 3:40:06 PM 
Subject: Migrating from v7 to v9 (same cluster IPs) - getting phones to recognize new v9 cluster 



So, still planning our v7 to v9 migration. The last time we did this, we went from v4 to v7 and changed the IP addresses of the servers. To ensure phones would go that way, we applied an ACL which blocked access to the servers, which forced a DHCP and they brought down the new TFTP address and voila, things went well. 

I was thinking of doing something similar during my migration to v9. In my testing of the ACLs though (still on v7), I noticed that the phones are not really bringing down a new copy of their configuration, just re-registering. 

I still have to test how phones behave when I complete the process, i.e. block ACL, unplug v7, plug in v9, allow ACL. 

Will the server and phone communication be sufficient to tell the phones to download a brand new configuration file? 

What have others done to migrate their phones from v7 to v9 when using the same cluster IPs? 

Lelio 




--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140123/e3d771b2/attachment.html>