[cisco-voip] changing sip headers

[Erick Wellnitz]

Wow.  I'm batting 1000 today

Exactly what I need.

Thansk!



On Mon, Jan 27, 2014 at 12:30 PM, Brian Meade (brmeade)
<brmeade at cisco.com>wrote:

>  Erick,
>
>
>
> I’d suggest doing sip bind’s based on dial-peer on your CUBE.
> https://supportforums.cisco.com/community/netpro/collaboration-voice-video/ip-telephony/blog/2013/04/04/cube-sip-media-and-signalling-binding-to-an-interface
>
>
>
> Brian
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Erick Wellnitz
> *Sent:* Monday, January 27, 2014 12:57 PM
> *To:* cisco-voip
> *Subject:* [cisco-voip] changing sip headers
>
>
>
> All,
>
>
>
> Is there an easy way to change the ip addresses in the SIP headers (both
> inbound and outbound) so that my CUCM and provider will both accept calls?
>
>
>
> Example:
>
> I have a 10.x.x.x/24 address on gig0/0, a PER address for BGP on gig0/1
> and lo0 has the provider's desired signalling address..
>
>
>
> CUCM isn't currently able to route to the provider signalling address as
> it is a 32.x.x.x address.
>
>
>
> Would it be easier to have the network team set up routing to the 32.x.x.x
> address or could I change the headers to accomplish this?
>
>
>
> Thanks!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140127/24935eb3/attachment.html>